Apr 8, 2008 #1 M Monolisa5791 Member level 3 Joined Jun 14, 2006 Messages 65 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,286 Activity points 1,962 Hi all, Can any one help me to extract the ascii netlist from Dx designer to PADS.I also tried with tools ------ create pcb netlist-------run but i couldn't get the ascii file.It shows the error as below. pcb: Fatal 7435: Error opening cms database file pcb: Note 5626: Summary of pcb.err Status 0, Notes 1, Warnings 0 Errors 1, Failures 0, Fatals 1, Internals 0 Please help me to extract the net list .
Hi all, Can any one help me to extract the ascii netlist from Dx designer to PADS.I also tried with tools ------ create pcb netlist-------run but i couldn't get the ascii file.It shows the error as below. pcb: Fatal 7435: Error opening cms database file pcb: Note 5626: Summary of pcb.err Status 0, Notes 1, Warnings 0 Errors 1, Failures 0, Fatals 1, Internals 0 Please help me to extract the net list .
Apr 8, 2008 #2 atul.takbhate Junior Member level 2 Joined Jun 4, 2007 Messages 24 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Location Pune Activity points 1,414 select netlist format as "PADS" Added after 9 minutes: 1st do the schematic check to remove errors "tools-schematic checker" and then try to generate the netlist.
select netlist format as "PADS" Added after 9 minutes: 1st do the schematic check to remove errors "tools-schematic checker" and then try to generate the netlist.