Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with a solution controlling the dc motor

Status
Not open for further replies.

tharindu.java

Newbie level 1
Joined
Aug 22, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
we are given a project to build a remote control car using 16f877A PIC. All we need is to drive two dc motors using the computer through the serial port. we are allowed to have wires connecting the car & the computer
I have found that this can be done with a L298 driver. can somebody tell me how to write a code or a place to find a sample code wriiten in pic c language. And also how to design the circuit.
thank you
 

pakitos

Advanced Member level 1
Joined
Nov 14, 2005
Messages
457
Helped
77
Reputation
154
Reaction score
35
Trophy points
1,308
Activity points
3,639
can you explain the block diagrams? why are you using the pic? if you are using the l298 it is for making the motors go right left or forwd backwd. for this you just need 1 0 or 0 1 to be send. as for the hardware simple check the data sheet of the l298.
let me know if ur still stuck and where


check this:
http://www.embedds.com/driving-dc-motor-with-l298-h-bridge-controlled-by-pic/

and book:Amphibionics: build your own biologically inspired robot By Karl P. Williams ( found on edaboard)
http://books.google.com/books?id=yo...esult&ct=result&resnum=9#v=onepage&q=&f=false

good luck
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top