HUYCUONGBK
Newbie level 4
You can help about ML300 kit (Xilinx) , i don't know how use it,special touch screen on it.Thank you
Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Help me use Xilinx ML300 kit
- Thread starter HUYCUONGBK
- Start date
- Status
HUYCUONGBK
Newbie level 4
Re: ML300 help me
thank you , please you can tell how i can enter "ML300 LOUNGE" and register ML300 because i tried to find ID Product fot ML300 but i can't find it . You can show some way to solve that...Thanks again echo47
thank you , please you can tell how i can enter "ML300 LOUNGE" and register ML300 because i tried to find ID Product fot ML300 but i can't find it . You can show some way to solve that...Thanks again echo47
echo47
Advanced Member level 5
ML300 help me
I found this link with the Xilinx search engine. No registration needed, but I don't know if this "V2PDK" lounge is the same as the other one that requires registration.
http://www.xilinx.com/ise/embedded/ml300_v2pdk/members/index.htm
To register the ML300 and its software, you probably need the original license/serial numbers that came with the product.
I found this link with the Xilinx search engine. No registration needed, but I don't know if this "V2PDK" lounge is the same as the other one that requires registration.
http://www.xilinx.com/ise/embedded/ml300_v2pdk/members/index.htm
To register the ML300 and its software, you probably need the original license/serial numbers that came with the product.
- Status