grace1977
Newbie level 1
hi for all
please any persone help me:
i have problem, when i read the paper R. J. Luebbers, Fellow, IEEE, and H. S. Langdon “A Simple Feed Model that Reduces Time Steps Needed for FDTD Antenna and Microstrip Calculations[/color]” IEEE TRAKSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 44, NO. I, JULY 1996. and programed by matlab ,i have the same result when resistive source Rs=50 ohm , but when the resistive source Rs=0 ohm i cannot get the same results in the paper ,
i connot understand where my mistake ,
please help me
thank for all
please any persone help me:
i have problem, when i read the paper R. J. Luebbers, Fellow, IEEE, and H. S. Langdon “A Simple Feed Model that Reduces Time Steps Needed for FDTD Antenna and Microstrip Calculations[/color]” IEEE TRAKSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 44, NO. I, JULY 1996. and programed by matlab ,i have the same result when resistive source Rs=50 ohm , but when the resistive source Rs=0 ohm i cannot get the same results in the paper ,
i connot understand where my mistake ,
please help me
thank for all