Help me fix my SMPS design

Status
Not open for further replies.

Fragrance

Advanced Member level 4
Joined
Jul 26, 2002
Messages
1,190
Helped
248
Reputation
496
Reaction score
202
Trophy points
1,343
Location
East Of Earth
Activity points
8,933
Hi All Friends



So finally I made it working by doing simple multivabrator but problem is that when load fluctuate, or some thing goes wrong the Q3 base collector get short what I did just add capacitor 1nF between base and ground, any good solution well come to safe the transistor Q3

Regards
Fragrance
 

Re: Need Help with smps

Hi,
1. You don't have any voltage limitation @ the output, but that shoud be Ok IF you have a load (to be calculated).
2. @ switch off, 2N2222 will suffer overvoltage too due to serial stray inductor and high dI/dt.
Regards,
 

Re: Need Help with smps

monnoliv said:
Hi,
1. You don't have any voltage limitation @ the output, but that shoud be Ok IF you have a load (to be calculated).
2. @ switch off, 2N2222 will suffer overvoltage too due to serial stray inductor and high dI/dt.
Regards,
Click to expand...

ok so what is the solution for the overvoltage

regrads
Fragrance
 

Re: Need Help with smps

Hi, one of the solutions can be: for the point
1. A zener diode rated @ max voltage and power when there is no load.
2. A compact design between Q3-D1-C3 (never mind about L1).
Regards,
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…