I want to design a box which have the following properties.
The incoming voltage is 24V. The output voltage will be adjusted by a pot, and the output voltage will be between 0 to 24 V. And the output current will be about 10 A.
Could you help me to design such a system.
How will be the topology, Which ICs should I use? Any idea
hi
u can use any D-DC converter
as you are saying you meed the variable out voltage you can make some tapping at the transformer which controls the o/p voltage
you can any switch mode suply
like fly back with some fet which depends on u i/p current
as you are saying your o/p current is 10 select the best componnets