Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me about ES 15421 9048 Thyristor

Status
Not open for further replies.

leotim

Full Member level 3
Joined
Jul 13, 2005
Messages
166
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,296
Activity points
2,596
Any one knows something about a thyristor with following labels:
ES 15421 9048
Some one says that it is a product of PGS S.P.A from Italy.
Any one knows about this company?
Any one has a datasheet or photo or any information about this part# and its manufacturer?
Thanks before.
 

Any one knows something about a thyristor with following labels:
ES 15421 9048
Some one says that it is a product of PGS S.P.A from Italy.
Any one knows about this company?
Any one has a datasheet or photo or any information about this part# and its manufacturer?
Thanks before.


Hi
I know, it's a long time ago, you asked this question. But I also try to find some informations about this thyristor.
However, 2 of these disk SCR (diameter 42 mm) are used in my electric car. The control unit is from Elektrosistem in Italy and is named Pulsar-R. So, obviously, the letters ES stand for 15421. The last number is the production date. The SCR must have a rated voltage above 200 V, because the battery voltage in my car can be slightly above 100 V. The current rating must be more than 130 A continuous and 400 A for 1 minute, based on the data sheet of the contoller.

Here you find more informations of the car: www.evalbum.com/2237

Best regards

Christoph
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top