Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help in selecting development board for microcontroller

Status
Not open for further replies.

s3034585

Full Member level 4
Joined
May 24, 2004
Messages
227
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,091
Hi Guys

Can anyone pls help me in selecting a development board for developing doing robotics stuff on them, not industrial robots. initially i would like to interface them with some radio control stuff, later would like to add image processing as well... i want to do the programming in C.

i went thrugh several websites realted to robotics and the most common micro controllers were parallax,avr, etc... i am wondering why microcontrollers from motoroller are not in so common. can some help me in selecting a right one for this idea.

thanks in advance.
tama
 

blueroomelectronics

Advanced Member level 5
Joined
Sep 17, 2006
Messages
1,686
Helped
179
Reputation
356
Reaction score
77
Trophy points
1,328
Location
Toronto, Canada
Activity points
8,696
MongooseProto.jpg

Mongoose Mechatronics kit, you need an ICD programmer like Junebug or Inchworm+
 

s3034585

Full Member level 4
Joined
May 24, 2004
Messages
227
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,091
Hi blueroomelectronics
Thanks for the image. it seems that you also into robotics. It would be nice if you can give ur opinion on selecting a development board. should i select fpga based or a microcontroller based. i dont know where to start with.


thanks in advance...
tama
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top