Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help identifying connector

Status
Not open for further replies.
DSNet

DSNet

Newbie level 5
Joined
Jul 9, 2009
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,388
I recently took apart a HDD and found this board-to-board connector that's used to attach the controller PCB to the stepper motor PCB underneath simply through "spring" contacts.

b2b_connector.jpg

I'm trying to figure what this connector type is called so that I can buy it on Mouser or Digikey. The pitch of the connector in the photo is 0.05inch. I would need either 0.05inch or 1mm pitch connectors of this type for my purposes.

Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top