Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help!!! How To Model a Shorted Stub in Ansoft Designer

Status
Not open for further replies.
A

antp

Junior Member level 2
Junior Member level 2
Joined
Jul 4, 2004
Messages
20
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,283
Visit site
Activity points
143
I model shorted stube as a part of the microwave filter. At transition from Layout to Planar EM, the connection between layers Top and Ground is lost. In Planar EM it passes to Assembly Top Layer. How to convert the ideal shunt between layers Top and Ground to real copper bridge: via, some vias, 3D Vias, e.t.c.? Please, any help, or any tutorials.
print_screen.jpg
The project here
View attachment GLOBAL_TRAINING_ALIGN_MW_PORTS.rar
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top