Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help for Planar antenna for microwave imaging system

Status
Not open for further replies.

Saleh85

Newbie level 3
Joined
Sep 11, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Australia
Activity points
1,295
I design planar antenna for microwave imaging system 8mmX10.6mm by using HFSS software and I got result for loss gain which should be less than -10 for 3-11GHZ .

This pic shows conductor which has pink color and slot with white color




and this shows wave port with yellow color



here the result which should lesdd than -10

Any one can help to impove this design to cover 3-11 GHZ with loss gain less than -10

 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top