help---cadence AMS designer mixed signal simulation problem

[saiaoying]

cadence ams designer

We run a demo mixed signal simulation on cadence AMS designer platform, after a series of enviroment settings(including:DEFINE connectLib ${AMSHOME}/tools/.../connect_lib in cds.lib),simulation is launched.
But, the following Error appears in the message bar of the HED: ncelab: *E, Unable to find a unit named 'ConnRules_18V_mid' in the libraries.

could you tell me how to solve this problem?
thanks!

 

[machinedog]

connectlib cadence

you conncetLib did not compile.you should re install your ius

 

[taik]

where is connectlib cadence

yes, machinedog is right...

you would need to compile your connectLib.

looking at the directory of connectLib, there should be an executable file known as compileLib or something like tat. just run this file and the connectLib will be compiled.

 

[mustangyhz]

Re: connectlib cadence

We run a demo mixed signal simulation on cadence AMS designer platform your_install_dir/tools/dfII/samples/tutorials/vfs_amsflow.t.Z
after a series of steps, I Run AMS Design Prep, the following Error appears in the message bar "Compiling vhdl.vhms in cellview VFS_AMS_PHY180.ADC.REF_LADDER_Behav./bin/sh:ncvhdl:command not found"
could you tell me how to solve this problem?
thanks!