Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help!!Any digital matel detector?

Status
Not open for further replies.

johnny01hk

Junior Member level 1
Joined
Apr 8, 2010
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,432
Hi all,
I wanna ask any matel detector circult is digital?

Cos I wanna the circult can output signal 1 (Logic1 , 5V).

And I have find a lot of matel detector circult which just output the MW audio signal.

I use oscilloscope can see that result.
When the matel close to coil the output have a phase shift.

So that When the output has phase shift a little bit.
And how to make the hardware to Logic 1?
(I have use XOR gate before, But can not work.)

Or other matel detector circult is design for output digital signal?
 

You will need to wire up another oscillator (needs to be very stable... try using XO) as reference and use a phase comparator to compare the phase of the detector oscillator. Then it should be simple to wire up digital logic for a logic high on detection.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top