briannama
Newbie level 2
hi,
i designed a printed monopole antenne for mulitband application. i used the microstrip fed. actually i found that the dimension of the ground plane has great effect on the matching, how can i slove this problem. and i also found that the length of the ground plane and microstrip fed line can effect the resonance frequency and match,too.
Added after 1 minutes:
sorry again, my e-mail is briannama@gmail.com, if you have any good suggestions, pls tell me, thanks a lot
Added after 27 seconds:
briannama@gmail.com
i designed a printed monopole antenne for mulitband application. i used the microstrip fed. actually i found that the dimension of the ground plane has great effect on the matching, how can i slove this problem. and i also found that the length of the ground plane and microstrip fed line can effect the resonance frequency and match,too.
Added after 1 minutes:
sorry again, my e-mail is briannama@gmail.com, if you have any good suggestions, pls tell me, thanks a lot
Added after 27 seconds:
briannama@gmail.com