Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

H bridge LT Spice Help

Status
Not open for further replies.

sarmad_101

Member level 3
Joined
Sep 18, 2008
Messages
56
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
GERMANY
Activity points
1,660
I am trying to make H bridge on LTSpice. I made a circuit and give the pulses at the gate of Mosfet...

I am geting 2 pules at the different time at the output.
when Q1 and Q4 is ON and Q2 and Q3 is off.
and when Q2 and Q3 is on and other off.

but donot know how i got the 2 more state of zero. by turning on Q1 and
Q2 and Q3 and Q4 off and then Q3 and Q4 on and Q1 and Q2 off.


i need a sine wave at the output?

Need help
 

Attachments

  • H bridge.rar
    2 KB · Views: 3
  • H bridge.jpg
    H bridge.jpg
    419.9 KB · Views: 16

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
48,399
Helped
14,251
Reputation
28,763
Reaction score
12,939
Trophy points
1,393
Location
Bochum, Germany
Activity points
280,093
The high side gate drive voltages has to be referred to respective source terminal rather than ground. Otherwise the transistors won't fully turn on.

i need a sine wave at the output?
What do you mean? To generated sine PWM, you have to design a PWM modulator.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top