Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Gsm sim900 continous data sending issue

Status
Not open for further replies.
S

sneha.tm

Newbie level 6
Newbie level 6
Joined
Jul 15, 2014
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
65
Hi al,
Im using GSM SIM900 modem to interface to the microcontroller STM32F100
It gets connected to the server and sent the data.Im sending data continuously with a time interval of 5 minutes or less.The next time after 5min i gave the AT command AT+CIPCLOSE,AT+CIPSHUT,AT+CIPSTART.... etc to connect to the server.But sometimes it shows response ERROR and after a delay only it gives response CONNECT OK.So im not able to send data that time.But this error not occuring always.Please help me to solve this.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top