Rohi231
Member level 2
I am working on gsm based irrigation system. I successfully communicated gsm with micro contoller.
i called from my mobile to gsm and after 2 ring, call gets activated. For this i used AT command
ATS0=2
Now i want to pass the commands. Like if i press 5 from my number light should on and when i press 6 light should get off.
My question is what AT command i should give for this :!:?
i called from my mobile to gsm and after 2 ring, call gets activated. For this i used AT command
ATS0=2
Now i want to pass the commands. Like if i press 5 from my number light should on and when i press 6 light should get off.
My question is what AT command i should give for this :!:?