Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Ground plane in an offline LLC converter?

Status
Not open for further replies.

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,496
Helped
53
Reputation
106
Reaction score
108
Trophy points
63
Activity points
13,005
Hi
Attached is the Eagle 7.4.0 schem & layout for a 150W isolated LLC converter. Vin = 390vdc, vout = 180v.
F(sw) = 100kHz at resonance.

(There is free viewer for Eagle 7.4.0 on web……

As you can see, the primary side control ground only meets the primary side power ground at one place, near D35, .....where there is no choice, it must meet there as the gate drive connects there.
Though Our contractor wants to just have a huge single ground plane instead…but do you agree, this would make a worse noise situation?
 

Attachments

  • LLC.zip
    133.3 KB · Views: 96

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top