getting problem with commun b/w two XBee Series 2 modules

[vsk1234]

xbee series 2 problem

Hi,
anyone can help me about zigbee? I am using two XBee Series2 modules for communcation. I have configured those two modules as below
ROUTER1:-
+++OK
ATCT 28F
OK
ATSH
13A200
ATSL
404A6C72
ATDH 13A200
OK
ATDL 404A6C6D
OK
ATWR
OK
ATCN
OK

ROUTER2:-
+++OK
ATCT 28F
OK
ATSH
13A200
ATSL
404A6C6D
ATDH 13A200
OK
ATDL 404A6C72
OK
ATWR
OK
ATCN
OK

But I am not getting data from 1 module to another.
Please tell me how can I check the communication between these two modules.
Please help me...

 

[massoumi]

Re: xbee series 2 problem

Hey,

DL of one module should be MY of the other and vice versa when you only have 2 nodes. Also, make sure you're using the same PAN ID for both. Don't need SL/SH for now!

If that didn't work, tell me what's your physical setup. Sometimes I mistakenly messed up the DIN and DOUT wires.

Soren