gidp
Newbie level 5
pic clock output
Hello,
Can anyone let me know how can I generate a clock of about 30KHz on the output of one of the pins of PORTC, In parallel to the main program. Meaning that I do not wan this clock freq’ to be affected by the
Main Program code length or delay. The clock should be with duty cycle of ~50%, and the crystal is 4MHz using PIC 16F887A.
Thanks in advanced,
Gid
Hello,
Can anyone let me know how can I generate a clock of about 30KHz on the output of one of the pins of PORTC, In parallel to the main program. Meaning that I do not wan this clock freq’ to be affected by the
Main Program code length or delay. The clock should be with duty cycle of ~50%, and the crystal is 4MHz using PIC 16F887A.
Thanks in advanced,
Gid