Be careful! There's got to be 120V in there somewhere; plus all that stuff spinning around. But at least you're in a church, so you won't have to travel far for the funeral.
Be careful! There's got to be 120V in there somewhere; plus all that stuff spinning around. But at least you're in a church, so you won't have to travel far for the funeral.
That's just it. It makes it kinda hard for a guy like me to identify said devices if the wire colors don't match. For instance. there is a large actuator looking thing mounted to a large removable panel on the back of this machine where all the other controls are. It is hidden when the panel is in place, however it ha a cable connecting the squeegee portion of this machine. It appears it would slide up and/or down. It does neither near as I can tell. It has a large connector with one yellow wire. There is a red wire hanging in the machine that looks to be of a type that might go into the connector also. the connector does indeed have a slot for it. the other ends that connect the cylinder component have a one yellow and one blue wire. The blue wire confuses me. I can find no such devise on the schismatics.
I think this might be the squeegee actuator switch not sure. When I try to follow the wires it gets confusing as the device where it goes, also doesn't have recognizable wiring. Case in point the fwd/rev switch I see.. has no red/white wires connected. I will try it again today. I will take some pictures to help try to explain my delima.
Sorry I'm still getting filtered on my post. I guess by the time I get approved the time to edit my post has elapsed. The connector is in photo 4, and 6. The brush switch is shown front photo 3, and back in photo 5. arrow indicates where the short occurred. Any help to fix this new issue greatly appreciated. Tried the brush re-set already.
Yea, Good to point out!And that's not a horseshoe, it's an omega, the symbol for Ohms.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?