Fuse and fuse holder to carry 1.9A rms at 50KHz?

[treez]

Hello,

Will this 3A fuse..(farnell 2309084)
https://uk.farnell.com/littelfuse/0...ge-3a-5x20mm-slow-blow/dp/2309084?Ntt=2309084

..and its fuse holder as follows...(farnell 1271691)
https://uk.farnell.com/littelfuse/64600001003/fuse-holder-pcb-20x5mm/dp/1271691?Ntt=1271691


..will these be OK to carry the 1.9A RMS , 50KHz sinusoidal AC current?

(i do mean "kilohertz" and not hertz)

 

[HMS1021]

If you look at the series L added it is less than 20nH and the shunt C added due to the mounting pads for the holder is less than 20pF each. (I doubled the value estimated for L and C just to be safe.)

XL = .006 ohms and XC > -100k ohms They are both so small that unless the fuse is in a high Q filter or resonator circuit you will never see it.