Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] FTP Communication using PC and SIM300??

Status
Not open for further replies.

xpress_embedo

Advanced Member level 4
Advanced Member level 4
Joined
Jul 5, 2011
Messages
1,154
Helped
161
Reputation
396
Reaction score
189
Trophy points
1,353
Location
India
embeddedlaboratory.blogspot.in
Activity points
10,591
I have to send data over FTP using SIM300.
I don't have any idea regarding networking..

I dont know which ftp site to use.
Thats why i use ftp.microchip.com

but not able to get what to do with this.
as i cant read any file or send any file to that site.

Please suggest me something regarding this topic..
Code:
AT+CIPSHUT
SHUT OK
AT+CLPORT="TCP","2021"
OK
AT+CLPORT?
TCP: 2021
UDP: 3030

OK
AT+CGATT=1
OK
AT+CGDCONT=1,"IP","airtelgprs.com"
OK
AT+CDNSCFG="122.160.120.56","202.56.230.7"
OK
AT+CDNSCFG?
PrimaryDns:122.160.120.56
SecondaryDns:202.56.230.7

OK
AT+CSTT="airtelgprs.com","",""
OK
AT+CIICR
OK
AT+CIFSR
106.202.129.64
AT+CIPSTATUS
OK

STATE: IP STATUS
AT+CIPHEAD=1
OK
AT+CDNSORIP=1
OK
AT+CIPSTART="TCP","ftp.microchip.com","21"
OK

CONNECT OK
+IPD27:220 Microsoft FTP Service
> ls

SEND OK
+IPD34:500 'LS': command not understood

I just want to see the contents of the site ftp.microchip.com

Please suggest me something..
I don't know what to do.
I am using SIM300 Module

Thanks in Advance
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top