adip
Newbie level 3
- Joined
- Jul 17, 2010
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Los Angeles
- Activity points
- 1,368
Hi
So I am trying to send data from SPI bus (from PIC MCU) to USB. I was using the MPSSE protocol and was able to do it .
The problem i am facing is that to run the program successfully , we have to restart the PIC MCU. The reason behind this is as soon as the program gets executed , the CLK goes to high, where as in the operation it starts from low. So everytime the program starts the MCU which is monitoring continuously misreads the intialisation.
Also i cant find the command to make it operate from high instead of going to low in the beginning.
I am using MPSSE . ftd2xx.h , lib to operate on the ftdi.
Thanks in advance.
So I am trying to send data from SPI bus (from PIC MCU) to USB. I was using the MPSSE protocol and was able to do it .
The problem i am facing is that to run the program successfully , we have to restart the PIC MCU. The reason behind this is as soon as the program gets executed , the CLK goes to high, where as in the operation it starts from low. So everytime the program starts the MCU which is monitoring continuously misreads the intialisation.
Also i cant find the command to make it operate from high instead of going to low in the beginning.
I am using MPSSE . ftd2xx.h , lib to operate on the ftdi.
Thanks in advance.