Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FT232H FT245 Async Mode

Status
Not open for further replies.
V

VirusX2

Member level 4
Joined
Nov 18, 2014
Messages
77
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,849
It seems that FT232h confuses the four data bits on each byte i send. Eg. whatever i send in hex format, keeps the D3:D0 and confuses the D7:D4.

Sent: 1 (0x01) : PC get: 225 (0xE1)
Sent: 50 (0x32) : PC get: 242(0xF2)
Sent: 173(0xAD) : PC get: 237(0xED)

and so on.. whatever i send it keeps the second part of the hex number correct and confuses the first..

What it can be..?
 

I changed the parallel bus from portd to portb and now does the same problem, but keeps the first hex and confuses the second.. waht can it be..?? please help. using PIC18f4553
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top