Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

frequency multiplier

Status
Not open for further replies.

paramis

Member level 2
Joined
May 28, 2012
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,571
Hi all
I want a circuit that can multiplie Frequency at 2,F(out)=F(in)*2.
the inpus signal is a pulse.
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
49,425
Helped
14,442
Reputation
29,148
Reaction score
13,239
Trophy points
1,393
Location
Bochum, Germany
Activity points
284,422
XOR with delay can work under certain prerequisites.
 

paramis

Member level 2
Joined
May 28, 2012
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,571
can u explain more about xor?
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
49,425
Helped
14,442
Reputation
29,148
Reaction score
13,239
Trophy points
1,393
Location
Bochum, Germany
Activity points
284,422
Have the signal send to a xor gate, one input delayed by a low-pass.
 

rohitkhanna

Banned
Joined
May 1, 2012
Messages
341
Helped
76
Reputation
150
Reaction score
75
Trophy points
1,308
Location
New Delhi, India
Activity points
0
Hi all
I want a circuit that can multiplie Frequency at 2,F(out)=F(in)*2.
the inpus signal is a pulse.

you want to multiply the frequency of a pulse ???
Ok, no problem. Can you please define what the frequency is then ?

If you can define, then the forum can make a circuit to multiply it for you.

best of luck dude !!
cheers !
:-D
 

paramis

Member level 2
Joined
May 28, 2012
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,571
you want to multiply the frequency of a pulse ???
Ok, no problem. Can you please define what the frequency is then ?

If you can define, then the forum can make a circuit to multiply it for you.

best of luck dude !!



cheers !
:-D


I need.Is that important for u?
 

barry

Advanced Member level 5
Joined
Mar 31, 2005
Messages
5,396
Helped
1,142
Reputation
2,296
Reaction score
1,163
Trophy points
1,393
Location
California, USA
Activity points
29,505
My guess is he means a square wave or pulse train. But that could be a wrong guess.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top