Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Frequency meter on displays TIL311 and DS32KHZ

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Visit site
Activity points
22,318


Presented here design is a frequency meter based on kit AVT 2269 with minor changes:
  • the device uses a more accurate quartz resonator – DS32KHZ (quartz oscillator with temperature compensation TCXO that operates with output signal 32,768kHz
  • presentation of measure results is carried out by displays TIL311 controlled by BCD signal, what allowed to resign from two chips 4543 (Decoder BCD to the code of indicator of 7-segment LED), by plugging the displays directly to the 4553 – in this way a little more space in the Hammond housing was gained

One of these pictures presents the frequency measurement at the output of sample system DS32KHZ.



Link to original thread - Miernik częstotliwości na wyświetlaczach TIL311 i DS32KHZ
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top