FPGA board, Mobile device communication

Status
Not open for further replies.
P

picko_again

Newbie level 4
Joined
Apr 16, 2007
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,330

I have a problem connecting a spartan 3 board with a mobile device through it's USB port...a spartan 3 starter kit has no USB port for communication so we need to use its RS232 port..and as the mobile device must communicate through USB so we need some kind of a converter in between...
please if anyone faced such a problem or have any idea how to do such communication please say..thanks in advance...
 

Hi,
well, you can use USB to UART bridge.

Do you have UART core available in your kit anyway?
 


Thanks for your help..but from this data sheet you must setup some drivers first this is a main problem we faced as we can't do this on a mobile device...so we need another hardware solution...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…