CataM
Advanced Member level 4
- Joined
- Dec 23, 2015
- Messages
- 1,275
- Helped
- 314
- Reputation
- 628
- Reaction score
- 312
- Trophy points
- 83
- Location
- Madrid, Spain
- Activity points
- 8,409
Hi everyone,
I need a Forward type XFMR rated for 30V in the primary, 100kHz, Npri/Nsec=6, Isec>5A.
I found the PA3856.001NL which almost suits.. the problem is the frequency.
How can I know if the XFMR from Pulse Engineering rated at 200kHz will saturate at 100 kHz if I do not know what ferrite they are using ?
Can anyone tell if it is safe if I use this rule of thumb to estimate the saturation flux density: Bmaxworst case conditions given by manufacturer design/Bsat=65% ?
Worst case conditions given by manufacturer: Vin=57V, 200kHz, D=50%.
Any comment is appreciated.
I need a Forward type XFMR rated for 30V in the primary, 100kHz, Npri/Nsec=6, Isec>5A.
I found the PA3856.001NL which almost suits.. the problem is the frequency.
How can I know if the XFMR from Pulse Engineering rated at 200kHz will saturate at 100 kHz if I do not know what ferrite they are using ?
Can anyone tell if it is safe if I use this rule of thumb to estimate the saturation flux density: Bmaxworst case conditions given by manufacturer design/Bsat=65% ?
Worst case conditions given by manufacturer: Vin=57V, 200kHz, D=50%.
Any comment is appreciated.