Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[51] for adc how to convert to 10v to 5v?

Status
Not open for further replies.

Murugappan.pl

Newbie level 2
Joined
Apr 30, 2015
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
12
i need 5v for adc input but actual voltage comes from some devic as 10v how to convert to 10v to 5v?
 

milan.rajik

Banned
Joined
Apr 1, 2013
Messages
2,528
Helped
540
Reputation
1,078
Reaction score
523
Trophy points
1,393
Activity points
0
You have to use a voltage divider which divides 10V into 5V and 5V. A 2 x 10k resistors will do the job. What MCU and ADC are you going to use ?
 

hobbyckts

Advanced Member level 1
Joined
Mar 12, 2015
Messages
481
Helped
88
Reputation
176
Reaction score
85
Trophy points
28
Activity points
2,457
As yours is a analog voltage input in the range of 0 to 10V I guess. Convert this to 0 to 5V with the help of instrumenation amplifier with a gain of 0.5 and feed the output of it to the ADC. It will be the better way to do the level conversion of an analog signals.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top