AMSA84
Advanced Member level 2
- Joined
- Aug 24, 2010
- Messages
- 577
- Helped
- 8
- Reputation
- 16
- Reaction score
- 8
- Trophy points
- 1,298
- Location
- Iberian Peninsula
- Activity points
- 6,178
Hi guys, does anyone has ever repaired this high impedance voltmeter?
I have a problem here with him. We can't do the zero properly. I have removed all the protection plates to clean all the dust (not many) and pull and push the circuit boards and so on and, after that, without the all the protection plates I have turned on the voltmeter and I managed to do the zero pretty well. However I verified that after inserting again the protection plates I got the same problem again. When I remove those protection plates he works fine.
This is very strange. It has happened to someone else?
Regards.
I have a problem here with him. We can't do the zero properly. I have removed all the protection plates to clean all the dust (not many) and pull and push the circuit boards and so on and, after that, without the all the protection plates I have turned on the voltmeter and I managed to do the zero pretty well. However I verified that after inserting again the protection plates I got the same problem again. When I remove those protection plates he works fine.
This is very strange. It has happened to someone else?
Regards.