Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

fluke 175 screen problem

Status
Not open for further replies.
C

czlory

Newbie level 2
Newbie level 2
Joined
Apr 12, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
13
Hello, I have a problem with my fluke...the display is blinking, changing the functions (around 3 times per second). It happened after i replaced the battery. Until then everything was ok. I cleaned the contacts of the Dial switch, no change.

I would like to check a service manual.
If anybody has it please send it to me.

Thank you
 

I would check the battery voltage, also put the previous battery back to see if it functions properly.

czlory said:
Hello, I have a problem with my fluke...the display is blinking, changing the functions (around 3 times per second). It happened after i replaced the battery. Until then everything was ok. I cleaned the contacts of the Dial switch, no change.

I would like to check a service manual.
If anybody has it please send it to me.

Thank you
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top