Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Flash programming TMS320F2810

Status
Not open for further replies.
D

djolestojic

Member level 5
Member level 5
Joined
Dec 9, 2001
Messages
85
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Activity points
508
tms320f2810 programming

Has anybody managed to program FLASH ROM of TMS320F2810 DSP by using the serial UART connection with PC.

Thanks
 

2djolestojic:
refer to "TMS320x281x DSP Boot ROM Reference Guide" (Literature Number: SPRU095B)

i have another question:
What moment SCITXDA, MDXA, SPISTEA, SPICLK sould be set with response to XRST for proper choice of bootload mode? With no powering down VCC, VCORE and AVCC.

The question was set up because SCITXDA is an output so it can not be set to 1 or 0 before reset pulse occurs, but setting the SCITXDA pin after reset occurs do not guarantee that boot mode will be determined correctly.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top