celhedo
Newbie level 5
Hi,
I've been working on designing an fir filter,with the following specifications:
Sampling freq:10K
passbannd range=0-2MHz
stopband range=4k-6khz.
I've been trying to use the fir1 function,but the message is frequency should be from 0 to 1.
How do i solve this?
Thanks.
I've been working on designing an fir filter,with the following specifications:
Sampling freq:10K
passbannd range=0-2MHz
stopband range=4k-6khz.
I've been trying to use the fir1 function,but the message is frequency should be from 0 to 1.
How do i solve this?
Thanks.