finding voltage from hfss s-matrix data output

[PADMAJA SAMANTARA]

hi every one,
I have simulated a microstrip transmission line in hfss 2013.
I got also s parameters.
But now i hv to calculate voltages from that.
e.g:
ihv s11, s12, s21 and s22
thn we know s11=v1-/v1+
my qstn is how to find v1+and v1- from the simulation result.
it is a mathematical solution .
hope one who knows it'll reply fast.

regards
padmaja

 

[volker@muehlhaus]

If you want to calculate voltages & currents, convert the S-parameters to Z-parameters:

https://www.rfcafe.com/references/electrical/s-h-y-z.htm

 

[PADMAJA SAMANTARA]

thnk u sir, igot tht .

but i hv only 4 -parameters s11,s12,s21, s22
thn how can i choose a1,a2, b1 and b2

regards
padmaja

 

[volker@muehlhaus]

Sorry, that link was somewhat difficult to read. Better use this one:
https://en.wikipedia.org/wiki/Impedance_parameters#Two_port

In the middle of the page, you find the conversion from S to Z-parameters (impedances).

 

[PADMAJA SAMANTARA]

thank u sir.