Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

filler cells - what is it and how it works?

Status
Not open for further replies.
filler cells

hi venkat
filler cells is nothing but a empty cells.no logic will be there.if any gap is there between i/0 cells and pad in that time u can use the filler cells

vamsi
 

Re: filler cells

Hai

Filler cells are employed to meet the continuity of nwell and pwell structures.

they are not logic cells.
 

Re: filler cells

FIller cells are used to keep the continuity between Nwell, PPlus, Nplus & Power Bus( Vdd & VSS).

See the following topic:
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top