hi gecky,i only design lna ,i will sonner in sha'a allah,design oscillator,i use s par. model in the lna design,hee the resultsgecky said:Hi abdoeng,
like in your reply to one of my posts, we need Harmonic Balance to ensure there is steady state osc. The S-para model can't be used for this. May I know how you design oscillators? Or all just depends on the accuracy of the nonlinear model?
Thanks!
if u r biasing the FET according to the data sheet nonlinear model give same s-parameter check your id and vds it shoud be similar as given in s parameter model.
hi i not agree with u that i try to simulate nonlinear with biasing of datasheet and very differ from the linear spar module,u know why?zeshan102 said:if u r biasing the FET according to the data sheet nonlinear model give same s-parameter check your id and vds it shoud be similar as given in s parameter model.
hi sini,i use atf36077 but at linear mode at design of lna,are u want its datasheet i can uploadsini said:Hi all,
I need nonlinear model of ATF26884 and ATF 36077 from @gilent and NE321S01 from N-E-C. I need this models for simulating VCO at 11GHz . Where to download this ?
Does anybody have measured s-par of this transistors?Are measured s-pars same as s-pars from manufacturers?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?