Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

feedback circuit in inverter

Status
Not open for further replies.
--BawA--

--BawA--

Advanced Member level 1
Joined
Nov 28, 2012
Messages
479
Helped
43
Reputation
86
Reaction score
42
Trophy points
1,318
Location
Noida, INDIA
Activity points
4,926
I have designed a dc dc converter i.e from 12vdc to 311vdc.which is regulated. I have used sg3525 .
The feedback is eshtablished using voltage divider resistive network at 311v side .
I want to use 4n35 optocoupler instead of directly using voltage divider network so as to isolate low voltage components from high voltage.i havn't used 4n35 ever .
Can anyone suggest me any way to use 4n35 for feedback?
 

Is there any optocoupler ,which can be used for isolating analog signal?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top