Failed ADS Simulation

[lufer17]

Hello everyone, I doubt the simulation when I go to Choose EM> Post-Processing> Far Field to open the Far Field Computation
Setup dialog box. .... This message appears I do not know what to do, please need guidance.


Current or Field information required for far field computation is not available.
Set the option 'Save currents for'
to 'User specified frequencies'
or 'All generated frequencies' in the Output Plan and re-run the simulation. .

 

[BigBoss]

Have you ticked "Save Currents" Option ?? The Message is very clear..

 

[lufer17]

This is problem, I can not find this option, the guide itself do this what I mentioned above, but do not talk about it. I don't know where I am, I'm moving is I can't find it.

 

[volker@muehlhaus]

Go to "Output Plan" in emSetup

 

[lufer17]

Thank you verThank you very much, with all due respect (I apologize) this complicated opera software, I follow the step by step or manual and it does not happen as expected. Example now, did not appear the screen like this in the frequency video. Time 6:51 to 6:56.

https://www.youtube.com/watch?v=lEZrFOMbnx4&list=LL2VpxMqQ6YfqIEDlYxtV4pQ&index=7&t=345s

At the time of simulation no data appears.

 

[volker@muehlhaus]

Good luck.

 

[lufer17]

Good luck.

I find where is the selected frequency, this is different from the video, follows the photo. Unfortunately you have to change every frequency step you want to see every single manifestation.

PS:de onde venho quem diz ''boa sorte'' para mim falta de respeito. Indica incompetência quem pede ajuda e na visão do outro, não vou te ajuda (falta de interisse ).:x