Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Facing a problem to design a picket potter horn antenn

Status
Not open for further replies.
R

Rakel Zobaer

Newbie level 2
Joined
Feb 21, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,295
Dear All,

Please anybody can help me?
I have designed a picket potter horn antenna, there are 3 parts of this antenna, 1. waveguide, 2. transition step, 3. aperture.
when i giving the half length of aperture(183.103668mm) of my main design parameters than the ansoft simulator gave me the answer but when i gave the full length of the aperture(366.207336mm) than it can't simulate and showing that "the out memory", what can i do for that?:-(

For that i have dicrease the mesh size but didn't get any result anymore.

Please give me any suggestion solve it.

Best Regards & Thank you
Zobaer Ahmed Rakel
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top