Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Fabricated Patch antenna not resonating at simulated frequency

Status
Not open for further replies.
A

anoop0988

Newbie level 2
Newbie level 2
Joined
Mar 29, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Austin, Texas
Visit site
Activity points
1,295
Hi,

I simulated a patch antenna with coaxial feed to resonate at 2.8 GHz with a return loss of -20 dB and no resonance elsewhere.
Please find attached my model.

I fabricated this antenna and tested it. The fabricated antenna has return loss of only -3.6 dB at 2.8 GHz whereas it is resonating at 5.8 GHz with a return loss of -20 dB.

Please let me know if I have done anything wrong in my simulation and design.

Thanks in advance.
 

Attachments

  • patchcoaxtut276 - Copy.rar
    36 KB · Views: 48

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top