F microstrip antenna in CST and HFSS.Please help

Status
Not open for further replies.
B

bkd

Full Member level 2
Joined
Dec 18, 2005
Messages
120
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Activity points
2,105
Hi eveyone
I am simulating F microstrip antenna in CST and HFSS. Drawing it in CST and HFSS is simple .But I do not know how to put the port to run the transient solver in this. Is this lumped port( discrete port) or waveguide port to get the good simulation. In HFSS I do not know how to put the port because the feeding lie inside the antenna. I post my picture with this question and hope there are someone have answer for me

---------- Post added at 10:12 AM ---------- Previous post was at 10:01 AM ----------

 

Hi bkd
where is the picture...?
 

    V

    Points: 2
    Helpful Answer Positive Rating
hi

isert dimension and the shape of the structure.

if not, there is a lot of helpful examples in eda forum

good luk
 

unfortunately

flickr.com is not working in our country !!!!!
 

IS there anyone help
 

Hi
I am not able to properly see the antenna, can you upload HFSS ( 11 ) file or some more antenna diagrams.....
 

I can see the image. I often use this lumped port configuration with other EM software. It should work fine.
 

in CST, pick a point on your feed port, link it to the body ground with a discrete port. and run the transient solver. that's all
 
Reactions: bkd

    B

    bkd

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…