Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Explanation of GSM control channels on multiframe

Status
Not open for further replies.

reach2rsa

Member level 1
Joined
Aug 22, 2006
Messages
40
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,494
Any good document which explain the control channels on multiframe.
 

Re: GSM Control Channels

reach2rsa,

I hope this helps,

mindrover
 

Re: GSM Control Channels

Hi Guys
I have a confusion about the data rates of GSM. I have read that....

"GMSK produces 270.833 K symbols/second
The gross transmission rate of the time slot is 22.8 Kbps
GSM is a digital system with an over-the-air bit rate of 270 kbps"

&
"Speech rate of 13kbps and data rate of 9.6kbps"
"Data rate of 13kbps and Channel rate of 22.8kbps"

*I do not have any confusion about Half and full rate that's why i have used full rate only.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top