enquir on Atmel AT89C5131

Status
Not open for further replies.
B

bramin19

Member level 1
Joined
Jan 18, 2011
Messages
36
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,512
I donot have burner circuit for 89s52. i heard that Atmel AT89C5131 is a microcontroller which does not need external burner.

Is it correct that it contains a USB port from which the hex file could be burnt to the microcontroller?
 

Yes it is true.
if you use keil it gives you option to program the hex code from keil without any supporting software...
If you have configured the BatchISP utility correctly, you just need to press the Load button from the µVision Toolbar to start flash programming.
 

on checking the datasheet i found that it cannot be operated at 11.0592 Mhz crystal frequency. So, can you suggest any micro controller which operates at this frequency and can be used to burn the code directly using USB port?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…