Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

eMMC interfacing with EC200U SDIO Power domain(1.8V,3.3V)

N

newbie_hs

Full Member level 1
Joined
Mar 4, 2023
Messages
96
Helped
1
Reputation
2
Reaction score
1
Trophy points
8
Activity points
770
I need to interface my eMMC(THGBMJG6C1LBAU7) memory with EC200U from Quectel.

The Quectel E200U has two SDIO ports one is working at 3.3V power domain and

other one is working at 1.8V power domain.

The eMMC VCC is 3.3V and VCCQ is 1.8V.

I am new to eMMC. This is my first design with eMMC.

I have two questions here.

  1. To which SDIO in EC200U do I need to connect the eMMC,1.8V SDIO or 3.3V SDIO.
  2. What is the difference between VCC and VCCq
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top