jacobliu
Newbie level 5
area bjt simulation hspice
Hi,
In hspice BJT simulation, there is a parameter "AREA".
Here is the description of this parameter in hspice manual:
Emitter area multiplying factor which affects currents,
resistances and capacitances. Default = 1.0.
&
The AREA parameter, the normalized emitter area, divides all resistors and
multiplies all currents and capacitors.
I have a vertical BJT spice model, the emitter area is 5*5, the base area is 11*11.
What is the value should i use in hspice simulation?
or,it is not a critical parameter in bandgap reference simulation?
Regards,
Hi,
In hspice BJT simulation, there is a parameter "AREA".
Here is the description of this parameter in hspice manual:
Emitter area multiplying factor which affects currents,
resistances and capacitances. Default = 1.0.
&
The AREA parameter, the normalized emitter area, divides all resistors and
multiplies all currents and capacitors.
I have a vertical BJT spice model, the emitter area is 5*5, the base area is 11*11.
What is the value should i use in hspice simulation?
or,it is not a critical parameter in bandgap reference simulation?
Regards,