Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

emi/emc, need guideline for removing noise

Status
Not open for further replies.
P

pinki patel

Newbie level 6
Joined
Sep 1, 2009
Messages
12
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
nashik
Activity points
1,363
emi/emc

hello friends,

we want guideline for our smps which is working in 765 Kilo Volt substation its output is connected to circuit breaker which has induction noise from other lines, because of this noise the mosfets on secondary side gets conducting without the input supply can we remove this noise by using any provision please give the guideline & proper solution for this the ratig of smps is 5V@100Ampere & switching frequency is 66.66 KHz
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top