how to connect the wire in my new capacitor?
the first image have 3 wires on the right side 2(black) and 1(red)
on the left is yellow.. i am confuse which the positive and negative wires
i know in common connection red is the positive but i don't if the yellow is also
positive..
there is no "positive" or "negative" wire, because it is AC.
All wires that were connected before must be connected after.
one possible solution is:
* capacitor black wire -- to--> black, black, red wire of fan.
* capacitor red wire -- to --> yellow, yellow wire of fan.
Be careful. Dangerous voltag and a lot of power from mains.
Carefully solder all components and isolate the solder joints.
Make sure the high potential does not touch any metal.