Hesambook
Full Member level 2
To design the schematic and PCB, I used Altium Designer, embedded a DS18B20 sensor to sense the temperature, and a small 5V-10A Panasonic Relay to control an external device. You can power the board using a 5V USB Type-C cable, such as a mobile phone charger or a power bank. I paid attention to supply filtering and decoupling to ensure the stable operation of the device.
more info: https://www.eeweb.com/dynamic-tempe...ing-over-wifi-using-esp-01-html-css-and-ajax/
1 RT9166-33GX: https://octopart.com/rt9166-33gx-richtek-19718671?r=sp
2 22uF-6.3V Tantalum Capacitor: https://octopart.com/t491c226k006at-kemet-141627?r=sp
3 USB3145: https://octopart.com/usb4135-gf-a-gct-126125931?r=sp
4 ESP01 WiFi Module: https://octopart.com/esp8266+esp-01s-jameco+valuepro-112142609?r=sp
5 ALDP105 Relay: https://octopart.com/aldp105-panasonic-45119914?r=sp
6 ESP8266 Arduino Board Manager: https://github.com/esp8266/Arduino
7 Arduino Code and “index.h” Files: https://drive.google.com/file/d/1AEEaLY38ofojJuzmZ1L3Njp0c5e1DCj4/view?usp=sharing
more info: https://www.eeweb.com/dynamic-tempe...ing-over-wifi-using-esp-01-html-css-and-ajax/
1 RT9166-33GX: https://octopart.com/rt9166-33gx-richtek-19718671?r=sp
2 22uF-6.3V Tantalum Capacitor: https://octopart.com/t491c226k006at-kemet-141627?r=sp
3 USB3145: https://octopart.com/usb4135-gf-a-gct-126125931?r=sp
4 ESP01 WiFi Module: https://octopart.com/esp8266+esp-01s-jameco+valuepro-112142609?r=sp
5 ALDP105 Relay: https://octopart.com/aldp105-panasonic-45119914?r=sp
6 ESP8266 Arduino Board Manager: https://github.com/esp8266/Arduino
7 Arduino Code and “index.h” Files: https://drive.google.com/file/d/1AEEaLY38ofojJuzmZ1L3Njp0c5e1DCj4/view?usp=sharing
