Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DSPIC30F4011-20E/P chip review

Status
Not open for further replies.

raman00084

Full Member level 6
Joined
Nov 29, 2010
Messages
362
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
4,006
hi every one i am going to develop a board on DSPIC30F4011-20E/P 40 pin dip package i need qei for that only i chosen this chip, had any tried this chip in ccs complier, does this chip has any issue kindly let me know


thank you

kalyan
 

There are a few issues discussed in the device errata PDF, no show stoppers.

I've used both the dsPIC30F301x and dsPIC30F401x series for numerous designs.

I don't have or use the CCS compiler, so I cannot offer any advice in that area.


BigDog
 
30F4011 is a classical dsPIC, I would expect that it's basically working with CCS.

It's still possible that you find bugs with specific CCS built-in functions, but less likely in this case. I would give it a try.
 

please suggest any 40 pin dip package dspic that do dot have any problem i2c, uart, io etc.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top